· Eye Laser Vision Correction
ILASIK is the combination of the
state-of-the-art laser technology, Intralase Bladeless Laser, the custom-made
Wavefront and the eye recognition system. ILASIK is completely custom-made.
Everything is performed based on the personal visional quality of the patient.
The technology used in the ILASIK method is extremely safe.
When patients who have
undergone ILASIK treatment
are examined, clinical studies performed after 1 year demonstrate the following:
· More than 95% of all patients participating
in the research study were able to pass their driving tests without eyeglasses
or contact lenses.
· 98% of the patients with minor or major
myopia and approximately 3/4 of all patients participating in the research
study had a vision quality of 100% or better than that of pre-operation without
wearing eyeglasses or contact lenses.
· Patients with minor or major myopia were 4
times more satisfied with their night vision quality compared to the night
vision that they had before the laser operation.
The first stage of the ILASIK method is the
determination of characteristic features of your vision, based on the tests
which also include the "Wavescan™ - Custom Made Treatment"
technology. The Wavescan system plots a 3-dimensional map of your visual defects.
Then with the custom-made treatment (Advanced CustomVue™) process, the
custom-made treatment is designed using the digital information obtained from
this map.
Wavefront
Wavefront involves sending a light beam
to the eye and applying a laser treatment tailored for a specific person, after
evaluating the image obtained from the retinal layer. This method is
specifically preferred in patients with night vision problems or with dilated
pupils, in order to avoid scattering, diffraction and haloing around light
after laser. After evaluation with special Wavefront analyzing devices, the
decision for surgery is made.
iDesign Wavefront
In laser treatment, customizing the treatment for each eye is key to
successful results. iDesign advanced Wavefront-guided system allows each eye to
be treated with custom-made treatments. Thus, the patients get rid of their
eyeglasses and lenses and achieve an ultra-HD vision quality. With the
Wavefront technology, 5 different measurements can be done in a short time. 5
different measurements that are normally done with automatic refractometer, keratometer,
topography, aberrometer and pupillometer can be done with a single device.
Custom-made treatments are offered using the data acquired. With the iDesign
Wavefront technology, detailed corneal analysis can be done and the refractive
errors can be identified up to the minute details. Thanks to the
high-resolution sensor, the optical aberrations of the eye can be analyzed with
a 5-times higher resolution. Better results and high patient satisfaction are
achieved in laser treatments done by using the iDesign Wavefront technology.
Treatment Stages in ILASIK
At the first stage, a personal vision profile is prepared by Wavescan
technology.
Afterwards, a corneal incision is created by
femtosecond, without using a blade. Finally, the vision can be corrected
by ILASIK.
Data reflected from the beams sent to the eye
is detected by a special camera. Such data is sent to the Laser and the
intended operation is performed. One of the reasons for preferring a
custom-made treatment (Advanced CustomVue™) is the ability to acquire an exact
patient-specific three-dimensional visual map with the aid of Wavefront aberrometer.
During laser treatments, pointing into the intended spot of the eye by the device is of crucial
importance.
Therefore, there should be a digital locking
system (eye tracker) between the eye and the device.
In the Wavefront treatment, measuring is performed in the sitting position, while the operation
takes place in the lying position. A minor rotational ocular movement may occur
while in the lying position. The laser device recognizes the iris of the
patient and detects even the smallest rotational ocular movements. Unlike other
eye tracking systems, this technology is also capable of monitoring the
rotational ocular movements of the eye around its own axis.
PRK / LASEK
PRK (Photorefractive
Keratectomy), like Lasik, is a treatment method to correct refractive
errors. Unlike Lasik, which is still the most commonly used technique, a thin
layer (flap) is not created by incision in the cornea in the PRK method;
instead, the laser is started directly from the external surface. A PRK
surgery involves removing the outer thin live tissue called epithelium
from the cornea and administering Excimer Laser on the tissue
underneath. A clear, protective "bandage" contact lens is placed in
the eye at the end of the operation to be worn for several days so that the
cornea surface can heal more easily. Recovery of good vision takes longer than
Lasik and may take 3-4 weeks. Pain and discomfort is felt for 2-4 days after
the operation because healing of the epithelial tissue is completed in this period.
LASEK
Lasek involves lifting the
eye's epithelial tissue using alcohol. The epithelium is replaced after the
administration of laser. Highly reliable results are obtained by this
two-surface method; however, some patients may experience burning, stinging and
watering in the eyes for 2-3 days. Vision gets clear within 1 week to 10 days
on average. With this treatment method, the final result may be achieved in the
third month; however, patients can carry out their daily activities without the
need for eyeglasses during this period of time.
Features of PRK and LASEK methods
· They are recommended for patients whose
corneal thickness is not suitable for Lasik surgery although they have low
diopter values (myopia and astigmatism up to -3D).
· As in the Lasik method, the eye is numbed by
eye drops only.
· The patient feels no pain during the
operation.
· A contact lens is placed to accelerate
renewal of the epithelium and protect the eye, and it is removed by the doctor
3-4 days after the operation.
SMILE
LASER / RELEX
The
customized bladeless SMILE laser is an advanced laser technology method in
myopia and astigmatism which enables treating myopia up to -10D and astigmatism
up to -5D. It is the ideal treatment method for athletes and professionals who
are at risk of being struck and exposed to pressure.
Properties
of the SMILE Laser Method:
Stages
of the SMILE Laser Treatment Method:
· Phakic intraocular lens
implantation is a trusted treatment method which
helps those whose eye structure is not suitable for laser treatment rid
themselves of their glasses or lenses, and provides precise and reliable
results in people with high myopia and hyperopia. At Contracted
Hospital, phakic lens surgeries are performed by specialist
doctors using the world's highest quality intraocular lenses.
· Based on the principle of implanting an
artificial, corrective lens inside the eye, this method is sometimes combined
with Lasik surgery. Myopia from 7 to 25 diopters and hyperopia from 5 to 13
diopters can be corrected.
· Who is eligible for phakic lenses?
· Phakic lens surgery is
suitable for people older than 18 who don't have glaucoma, retinal
disorders or cataract. The final decision
as to whether a person is eligible for this treatment can be made after a
detailed eye examination and examination of the corneal tissue through special
analysis.
· Technique of Phakic Lens Surgery
· Phakic lens surgery lasts nearly 20 minutes
for each eye and the patient feels nothing under anesthesia. A minimum of a
7-day interval is allowed between the operations of two eyes and the eye
remains bandaged for only 1 day after the operation. The bandage is removed by
the doctor the next day and the patient's vision becomes clear enough for them
to resume their daily activities without wearing glasses or lenses.
· The lens implanted in the eye is clear and
made of a material which is compatible with ocular tissue, without causing any
problems in its lifetime. These intraocular lenses cannot be seen from the
outside after the surgery and the presence of the lens cannot be felt by the
patient either.
We use cookies that include third party cookies to provide the best possible experience for you on our page and to introduce you to your attention. For information about the cookies we use and how to disable them, you can check our Cookie Policy . By continuing your visit on our page, you consent to the use of cookies.